2e4ae055d8bbc22025280d4aec769255.png

 

Laser Driver EVM /OEM Boards

MOT600_xxGC

MOT600-EVM-grey.JPG

(Dim. 102mm x 54mm)

Constant Current & Constant Power Laser driver OEM board

MOT600_xxGC_CC / MOT600__xxGC_CP

MOT600_ are designed to allow the user to quickly evaluate and implement a laser diode design based on the MOT5550GC-xx and MOT6550GC_xx series laser driver module families. All module configurations are supported. The board contains all required components including the laser driver module.

Te board includes on-board diodes which can be used to simulate the laser even if no laser is present.

The OEM can be used standalone, and includes connectors which can be used for monitoring system parameters such as diode current and module temperature. On-board potentiometers can be used to set output current.

Various control signals are also accessible, including output current control voltage and reset/shutdown functions, making it very easy to connect to a host control system, further simplifying system development. The user needs only to provide the appropriate supply voltages and the laser of choice, and can be up and running in minutes.

     Complete solution and ready to be used.

     Features
  • Include the laser driver module. 3.3V to +5V.

  • Single supply for GC boards and dual supply for GA boards.
  • Dual mode boards can be programmed for constant current CC, or Constant power CP.
  • Both GC (grounded Cathode) and GA (grounded Anode) available.
  • Stand alone or host control through convenient edge connector.
  • Fully RoHS compliant.
  • Include on-board dummy load for evaluation of features.

Selection Table

Part #

Max. Output Current

Power Supply

MOT600_25GC_CC*

250mA constant current GC laser driver OEM board

Single

MOT600_50GC_CC

500mA constant current GC laser driver OEM board

Single

MOT600_100GC_CC

1000mA constant current GC laser driver OEM board

Single

MOT600_25GC_CP*

250mA dual mode GC laser driver OEM board

Single

MOT600_50GC_CP

500mA dual mode GC laser driver OEM board

Single

MOT600_100GC_CP

1000mA dual mode GC laser driver OEM board

Single

* For other laser configurations replace GC with your required configurations.

e.g. for GA (grounded Anode) the part no. will be MOT600_25GA_CC or MOT600_25GA_CP.

App. BriefAcrobat-17.gif

User GuideAcrobat-18.gif

View In Online Store CC

View In Online Store CP

MOT605_xxGC

MOT605_OEM2.JPG

(Dim. 72mm x 51mm)

Constant Current & Constant Power Laser driver OEM board MOT605_xxGC_CC / MOT605_xxGC_CP:

The MOT605 OEM boards are functionally equivalent to MOT600 but having a smaller footprint (72 x 51 mm). The interface connector (CN8) includes LD_SET pin, which was missing in MOT600 boards.

MOT605_xxGC is designed for single supply laser drivers, that is MOT5550GC and MOT6550GC. See user guide for detail.

The MOT605_xxGC board includes all the components, including the laser driver module, and is ready to be connected to the laser. On-board dummy load (a series of diodes and a 1Ω resistor) will assist in experimenting with this board before connecting to a laser.

     Features

  • Complete solution and ready to be used.
  • Include the laser driver module.
  • Single supply +3.3V to +5V
  • Both constant current and dual mode are available.
  • Stand alone or host control through convenient edge connector.
  • Fully RoHS compliant.
  • Include on-board dummy load for evaluation of features.

Selection Table

Part #

Max. Output Current

Power Supply

MOT605_25GC_CC

250mA constant current GC laser driver OEM board

Single

MOT605_50GC_CC

500mA constant current GC laser driver OEM board

Single

MOT605_100GC_CC

1000mA constant current GC laser driver OEM board

Single

MOT605_25GC_CP

250mA dual mode GC laser driver OEM board

Single

MOT605_50GC_CP

500mA dual mode GC laser driver OEM board

Single

MOT605_100GC_CP

1000mA dual mode GC laser driver OEM board

Single

App. BriefAcrobat-19.gif

User GuideAcrobat-20.gif

View In Online Store CC

View In Online Store CP

Banner2.png